Inspection Instruments

3-D measuring machines are designed for 3-dimensional calibration of certifiable accuracy. 
Model:FLY-654
Resolution:0.0001mm
Measurement Accuracy:2.3+L/300u

3-D measuring machines are designed for 3-dimensional calibration of certifiable accuracy. 
Model:CM 654－CP
Resolution:0.0001mm
Measurement Accuracy:3.5+4.5*L/1000u

Measuring two coordinates and simple three coordinates in different kinds of precision finishing work piece on the slope, round, bad ditch, columns, ball, dimension, and other geometrical terms.

Measuring instrument which projects an enlarged shadow of the part being measured on a screen, where it is compared to a master drawing. With the device, complicated shaped parts can be easily checked.

X-Ray Elemental Analysis is an analytical technique used to perform elemental identification of materials.

Surface roughness measuring instrument is an equipment used to measure a material surface roughness. show the measured roughness depth (Rz) as well as the average roughness value (Ra) in µm.

Hardness tester can detect the hard degree of the material. The term of resist deformation, usually by penetration, resistance to bending, scratching, abrasion or cutting.In Rockwell way.

Hardness tester can detect the hard degree of the material. The term of resist deformation, usually by penetration, resistance to bending, scratching, abrasion or cutting.In Vickers way.

Tensile testing, is a fundamental materials science test in which a sample is subjected to a controlled tension until failure. The results from the test are commonly used to select a material for an application, for quality control, and to predict how a material will react under normal forces.

The Salt Spray Tester is used to create and maintain the salt spray (fog) test environment, and test the anti-corrosion quality of all the materials surfaces after the rust-proof of painting, coating, electroplating, anodizing and rust-proof of greasing.